Activation |

Activation

    Opening Sensor

    These unidirectional radars detect approaching movement, and filter out movements away from the door.
    The radars have a vertical tilt angle of 0 to 90 degrees and a lateral one of -30 to 30 degrees, which provides a radar area of up to 4m wide and 2m deep (wide angle) or 2m wide and 2.5m deep (narrow angle).
    These radars can be mounted between 1.8m and 4m high, and have a minimum detection speed of 5cm per second.


    Push Pads

    Narrow Push Pads
    These satin stainless steel 115mm x 45mm push pads can be mounted flush onto a wall or door jamb, or supplied with a back box for surface mounting.
    A version of these is available with a transmitter for wireless activation of the automatic door operator.
    Square Push Pads
    These satin stainless steel 115mm x 115mm push pads can be mounted flush onto a wall or supplied with a back box for surface mounting.
    A version of these is available with a transmitter for wireless activation of the automatic door operator.
    Touchless Push Pad
    These 160mm round touchless sensors are suitable for internal and external use, and are available in either a wired or wireless version.


    Key switches

    These satin stainless steel 115mm  x 45mm 3 position key switches can be mounted flush onto a wall or door jamb, or supplied with a back box for surface mounting.
    These switches enable the automatic operator to be set in either Automatic or Hold Open mode or simply switched off, which is useful if the door will be mechanically locked, as this helps to prevent damage to the operators.